您的位置: 标准下载 » 美军标 MIL » MIL-HDBK »

MIL-HDBK-633A

时间:2024-05-09 15:53:56 来源: 标准资料网 作者:标准资料网 阅读:9633
下载地址: 点击此处下载
MIL-HDBK-633A, DEPARTMENT OF DEFENSE HANDBOOK: STANDARD FAMILY OF MOBILE ELECTRIC POWER GENERATING SOURCES, GENERAL DESCRIPTION INFORMATION AND CHARACTERISTICS DATA SHEETS (26 JAN 2010) [SUPERSEDES MIL-STD-633E]., This standard provides detailed information on the physical and electrical characteristics and logistical data on the DOD approved family of mobile electric power engine-driven generator sets. The standard has been prepared for use by all Departments and Agencies of the DOD in selecting engine-driven generator sets and ancillary equipment for applications requiring mobile sources of electric power and to assist the PM-MEP in effecting management and standardization of such sources of power within the DOD. The engine-driven generator sets listed herein are the only mobile sets authorized for procurement. DOD components with mobile electric power requirements within the range of 0.5 kW through 750 kW, whose needs cannot be satisfied by one of the listed generator sets, must obtain deviation approval of the Project Manager before taking any procurement action. Special instructions on the preparation and submittal of deviations are contained in the Logistics Joint Operating Procedures AR 700-101, AFR 400-50, NAVMATINST 4120.100A, MCO 11310.8c and DLAR 4120.7 titled Management and Standardization of Mobile Electric Power Generating Sources.
下载地址: 点击此处下载
基本信息
标准名称:城市公用事业互联互通卡清分清算技术要求
英文名称:Accout settlement technical requirements for city union card of public utility
发布部门:中华人民共和国住房和城乡建设部
发布日期:2010-04-17
实施日期:2010-10-01
首发日期:
作废日期:
主管部门:住房和城乡建设部标准定额研究所
提出单位:住房和城乡建设部标准定额研究所
归口单位:住房和城乡建设部标准定额研究所
起草单位:住房和城乡建设部IC 卡应用服务中心
起草人:王辉、周欣、杜昊、杨辉、王鑫、周波、马虹、申绯斐、王毅、(以下按姓氏笔画排序)王宝鸫、邓文豪、张旭光、宫砚天、贾立强、程明、谭宁
出版社:中国标准出版社
出版日期:
页数:28页
适用范围

本标准规定城市公用事业互联互通卡数据清算、清分处理、数据接口要求和通讯要求等。
本标准适用于公共交通、风景园林、数字社区、供水、供气、供热等城市公用事业互联互通卡清分清算的应用。

前言

没有内容

目录

前言Ⅰ 1 范围1 2 规范性引用文件1 3 术语和定义1 4 缩略语和符号2 5 数据清算2 6 清分处理4 7 数据接口要求4 8 通讯要求16 附录A (资料性附录) 清分划拨方式22 附录B (规范性附录) 数据类型描述23

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T2311 信息技术 字符代码结构与扩充技术
GB2312 信息交换用汉字编码字符集·基本集
CJ/T166 建设事业集成电路(IC)卡应用技术

所属分类: 冶金 金属化学分析方法 重金属极其合金分析方法 冶金 有色金属 镍 铬及其合金
【英文标准名称】:Alloyandtemperdesignationsystemsforaluminium(metric)
【原文标准名称】:铝合金(米制)及回火命名体系
【标准号】:ANSIH35.1M-1982
【标准状态】:作废
【国别】:
【发布日期】:
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:
【国际标准分类号】:
【页数】:
【正文语种】: